Auto-Sleepers Symbol Plus 2018, Manual

Page: 52 / 126

7-28
CONNECTION OF SERVICES
If the engine is started the step will move in automatically, after a short warning buzzer. If this
operation fails due to an obstacle a buzzer will sound continuously to warn that the step is still
out and therefore requires your attention.
3.12 Temperature Readings
The EC700 Temperature sensor measures the ‘core’ temperature of the vehicle and provides a
figure for information only. The same sensor also measures humidity, providing a figure (also for
information only) from within that area.
It is hoped that the temperature information is a particularly useful figure, for instance when
checking on the vehicle remotely during cold weather.
Heat from other items in the vehicle (in particular components from the heating system itself) will
have a bearing on the reading displayed by the Autosleeper system. Ventilation is also present
and air entering or passing through this area will also have an effect on the temperatures and
humidity levels displayed.
3.13 System Warnings
The system incorporates a number of warnings that are active at specific times. These are
summarised below and also covered by relevant sections of this manual.
When a warning is active a warning pop up will be displayed on the screen describing the
problem(s).