AudioCodes Media Pack MP-124, User Manual

Page: 576 / 584

User's Manual 576 Document #: LTRT-65422
MP-11x & MP-124
43.13 Auxiliary and Configuration File Name Parameters
The configuration files (i.e., auxiliary files) can be loaded to the device using the Web
interface or a TFTP session. For loading these files using the ini file, you need to configure
these files in the ini file and configured whether they must be stored in the non-volatile
memory. The table below lists the ini file parameters associated with these auxiliary files.
For more information on the auxiliary files, see 'Loading Auxiliary Files' on page 327 .
Table 43-63: Auxiliary and Configuration File Parameters
Parameter Description
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their defaults
before processing the updated ini file.

[0] = Disable - parameters not included in the downloaded ini file
are not returned to default settings (i.e., retain their current
settings).

[1] = Enable (default).
Note: This parameter is applicable only for automatic HTTP update
or Web ini file upload (not applicable if the ini file is loaded using
BootP).
[SaveConfiguration] Determines if the device's configuration (parameters and files) is
saved to flash (non-volatile memory).

[0] = Configuration isn't saved to flash memory.

[1] = (Default) Configuration is saved to flash memory.
Auxiliary and Configuration File Name Parameters
Web/EMS: Call Progress Tones
File
[CallProgressTonesFilename]
Defines the name of the file containing the Call Progress Tones
definitions. For more information on how to create and load this file,
refer to
DConvert Utility User's Guide .
Note: For this parameter to take effect, a device reset is required.
Web/EMS: Prerecorded Tones
File
[PrerecordedTonesFileName]
Defines the name (and path) of the file containing the Prerecorded
Tones.
Note: For this parameter to take effect, a device reset is required.
Web: Dial Plan File
EMS: Dial Plan File Name
[DialPlanFileName]
Defines the name (and path) of the Dial Plan file. This file should be
created using AudioCodes DConvert utility (refer to
DConvert Utility
User's Guide ).
[UserInfoFileName] Defines the name (and path) of the file containing the User
Information data.