AudioCodes Media Pack MP-124, User Manual

Page: 216 / 584

User's Manual 216 Document #: LTRT-65422
MP-11x & MP-124

To configure calling name manipulation rules:
1. Open the required Calling Name Manipulations page ( Configuration tab > VoIP menu
> GW and IP to IP submenu > Manipulations > Calling Name IP->Tel or Calling
Name Tel->IP ).
2. Click the Add button; the following dialog box appears:
Figure 21-2: Calling Name Manipulation IP2Tel - Rule Tab
3. Click the Rule tab, and then configure the matching characteristics. For a description
of the parameters, see the table below.
4. Click the Action tab, and then configure the manipulation operation. For a description
of the parameters, see the table below.
5. Click the Submit button to save your changes.
Table 21-3: Calling Name Manipulation Parameters Description
Parameter Description
Matching Characteristics (Rule)
Web: Destination Prefix
Defines the destination (called) telephone number prefix and/or suffix.
You can use special notations for denoting the prefix. For example,
[100- 199](100,101,105) denotes a number that starts with 100 to 199
and ends with 100, 101 or 105. You can also use the $ sign to denote
calls without a called number. For a description of available notations,
see 'Dialing Plan Notation for Routing and Manipulation Tables' on
page
419 .
Web/EMS: Source Prefix
Defines the source (calling) telephone number prefix and/or suffix. You
can use special notations for denoting the prefix. For example,
[100-
199](100,101,105) denotes a number that starts with 100 to 199 and
ends with 100, 101 or 105. You can also use the $ sign to denote calls
without a calling number. For a description of available notations, see
'Dialing Plan Notation for Routing and Manipulation Tables' on page
419 .
Web: Calling Name Prefix
Defines the caller name (i.e., caller ID) prefix. You can use special
notations for denoting the prefix. For example, to denote any prefix, use
the asterisk (*) symbol or to denote calls without a calling name, use
the $ sign. For a description of available notations, see 'Dialing Plan
Notation for Routing and Manipulation Tables' on page
419 .
Web: Source Trunk Group
ID
Defines the source Hunt Group ID for Tel-to-IP calls. To denote all Hunt
Groups, leave this field empty.
Notes:

This parameter is applicable only to the Calling Name Manipulations