AudioCodes Media Pack MP-124, User Manual

Page: 161 / 584

Version 6.6 161 MP-11x & MP-124
User's Manual 13. Media

To configure the analog parameters:
1. Open the Analog Settings page ( Configuration tab > VoIP menu > Media submenu >
Analog Settings ).
Figure 13-9: Analog Settings Page
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 324 .
13.5 Configuring DSP Templates
The DSP Template determines the coders that can be used by the device and various
other functionalities. For a list of DSP templates and the maximum number of channels
supported by each coder, see 'DSP Templates' on page
579 . You can select a single DSP
Template.
Notes:
•
If no entries are defined, the device uses the default DSP template (i.e.,
Template 0).
•
A single DSP Template can also be configured using the ini file
parameter, DSPVersionTemplateNumber.

To select a DSP Template(s):
1. Open the General Settings page ( Configuration tab > VoIP menu > Media > General
Media Settings ).
Figure 13-10: Defining Single DSP Template in General Settings Page
2. In the 'DSP Version Template Number' field, enter the required DSP Template
number.
3. Click Submit .
4. Reset the device with a flash burn for the settings to take effect (see 'Saving
Configuration' on page
324 ).