AudioCodes Media Pack MP-124, User Manual

Page: 569 / 584

Version 6.6 569 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description
[RedirectNumberMapTel2IP] FORMAT RedirectNumberMapTel2Ip_Index =
RedirectNumberMapTel2Ip_DestinationPrefix,
RedirectNumberMapTel2Ip_RedirectPrefix,
RedirectNumberMapTel2Ip_RemoveFromLeft,
RedirectNumberMapTel2Ip_RemoveFromRight,
RedirectNumberMapTel2Ip_LeaveFromRight,
RedirectNumberMapTel2Ip_Prefix2Add,
RedirectNumberMapTel2Ip_Suffix2Add,
RedirectNumberMapTel2Ip_IsPresentationRestricted,
RedirectNumberMapTel2Ip_SrcTrunkGroupID,
RedirectNumberMapTel2Ip_SrcIPGroupID;
[\RedirectNumberMapTel2Ip]
For example:
RedirectNumberMapTel2Ip 1 = *, *, 4, 0, 255, , , 255, -1, -1;
Note: For a description of this table, see 'Configuring Redirect
Number Manipulation' on page 218 .
Phone Context Table
Web: Phone Context Table
EMS: SIP Manipulations >
Phone Context
[PhoneContext]
This table parameter configures the Phone Context table. This
parameter maps NPI and TON to the SIP 'phone-context'
parameter, and vice versa.
The format for this parameter is as follows:
[PhoneContext]
FORMAT PhoneContext_Index = PhoneContext_Npi,
PhoneContext_Ton, PhoneContext_Context;
[\PhoneContext]
For example:
PhoneContext 0 = 0,0,unknown.com
PhoneContext 1 = 1,1,host.com
PhoneContext 2 = 9,1,na.e164.host.com
Note: For a detailed description of this table, see 'Mapping
NPI/TON to SIP Phone-Context' on page 220 .
Web/EMS: Add Phone Context
As Prefix
[AddPhoneContextAsPrefix]
Determines whether the received Phone-Context parameter is
added as a prefix to the outgoing Called and Calling numbers.

[0] Disable (default)

[1] Enable
43.11 Least Cost Routing Parameters
The Least Cost Routing (LCR) parameters are described in the table below.
Table 43-61: LCR Parameters
Parameter Description
Web: Routing Rule Groups
Table
[RoutingRuleGroups]
This table parameter enables the LCR feature and configures the
average call duration and default call cost. The default call cost
determines whether routing rules that are not configured with a Cost
Group are considered as a higher or lower cost route compared to
other matching routing rules that are assigned Cost Groups.
[ RoutingRuleGroups ]
FORMAT RoutingRuleGroups_Index =