AudioCodes Media Pack MP-124, User Manual

Page: 527 / 584

Version 6.6 527 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description
"1001" upon On Busy:
FwdInfo 0 = 1,1001,30;

Below configuration forwards calls originally destined to Port 2 to an
IP address upon On Busy:
FwdInfo 1 = 1,2003@10.5.1.1,30;
Note: For a detailed description of this table, see Configuring Call
Forward on page 270 .
Call Forward Reminder Ring Parameters
Notes:

These parameters are applicable only to FXS interfaces.

For a description of this feature, see Call Forward Reminder Ring on page 249 .
Web/EMS: Enable NRT
Subscription
[EnableNRTSubscription]
Enables endpoint subscription for Ring reminder event notification
feature.

[0] Disable (default)

[1] Enable
Web: AS Subscribe
IPGroupID
[ASSubscribeIPGroupID]
Defines the IP Group ID that contains the Application server for
Subscription.
The valid value range is 1 to 8. The default is -1 (i.e., not configured).
Web: NRT Retry
Subscription Time
EMS: NRT Subscription
Retry Time
[NRTSubscribeRetryTime]
Defines the Retry period (in seconds) for Dialog subscription if a
previous request failed.
The valid value range is 10 to 7200. The default is 120.
Web/EMS: Call Forward
Ring Tone ID
[CallForwardRingToneID]
Defines the ringing tone type played when call forward notification is
accepted.
The valid value range is 1 to 5. The default is 1.
43.10.5.4 Message Waiting Indication Parameters
The message waiting indication (MWI) parameters are described in the table below.
Table 43-43: MWI Parameters
Parameter Description
Web: Enable MWI
EMS: MWI Enable
[EnableMWI]
Enables Message Waiting Indication (MWI).

[0] Disable (default).

[1] Enable
Notes:

This parameter is applicable only to FXS interfaces.

The device supports only the receipt of SIP MWI NOTIFY
messages (the device doesn't generate these messages).

For more information on MWI, see 'Message Waiting
Indication' on page
251 .
Web/EMS: MWI Analog Lamp
[MWIAnalogLamp]
Enables the visual display of MWI.

[0] Disable (default).

[1] Enable = Enables visual MWI by supplying line voltage
of approximately 100 VDC to activate the phone's lamp.