AudioCodes Media Pack MP-124, User Manual

Page: 415 / 584

Version 6.6 415 MP-11x & MP-124
User's Manual 41. Testing SIP Signaling Calls
Figure 41-6: Batch Test Call Example
•
Test Call table configuration at Device A:
♦
Endpoint URI: "101"
♦
Called URI: "201"
♦
Route By: Dest Address
♦
Destination Address: "10.13.4.12"
♦
Call Party: Caller
♦
Maximum Channels for Session: "3" (this setting configures three endpoints -
"101", "102" and "103)
♦
Call Duration: "5" (seconds)
♦
Calls per Sec: "1"
♦
Test Mode: Continuous
♦
Test Duration: "3" (minutes)
♦
Schedule Interval: "180" (minutes)
•
Test Call table configuration at Device B:
♦
Endpoint URI: "201"
♦
Call Party: Caller
♦
Maximum Channels for Session: "3" (this setting configures three endpoints -
"201", "202" and "203)

Registration Test Call Scenario: This example describes the configuration for testing
the registration and authentication (i.e., username and password) process of a
simulated test endpoint on the device with an external proxy/registrar server. This is
useful, for example, for verifying that endpoints located in the LAN can register with an
external proxy and subsequently, communicate with one another.