manualshive.com logo in svg

ATON CLT321, User Manual

Share
Download
ATON CLT321 User Manual Download Page 8

6

20407785en_ba_b0

ECO Mode (Ecomode plus / Automatic regulation of the power level)

“ECO Mode” is already activated by default, i.e. the transmission signals will
be switched off in stand-by mode. This setting can be restored at any time by
resetting the base station (see page 69).

When inactive the transmitters on the base as well as on the handset are switched off
completely, the radiation load is thus reduced to zero.
During a call the power level is demand-actuated, i.e. the closer the handset is located to
the base, the lower is the power level. The maximum available power level can be set to
three different levels (see page 64 / 

[ECO Mode]

) :

- [Full range] = max. power level: 100% (default setting)
- [Half range] = max. power level: approx. 45%
- [One room] = max. power level: approx. 20%
- [Desk] = max. power level: approx. 10%
- [Off] = Switched off

This function is only guaranteed to work when Aton CLT321 handsets are
registered on the base station. Registering other handsets, such as previous
model ranges, is possible, in which case, however, the aforementioned
requirements will not be fulfilled.

!

!

Introduction

Summary of Contents for CLT321





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands