ATON CLT321 User Manual Download Page 41

Page: 41 / 100

20407785en_ba_b0

Storing an SMS as a draft

You can store up to 10 SMS messages as drafts for editing or sending later on.

Open

[SMS]

Select

[New SMS]

and press

[OK]

Enter your text. Press

[Option]

Select

[Store as Draft]

and press

[OK]

Editing / sending an SMS draft

Open

[SMS]

Select

[Drafts]

and press

[OK]

Select a draft.
You can edit this draft (

[Read]

) and then save it again or send it using

[Option]

Using

[Delete]

you can delete the current draft or using

[Delete All]

you can delete

all drafts.

Please note

: If you receive a call while creating an SMS, the SMS will be stored

automatically. You can accept the call and return to writing or sending the SMS later on
by calling up “New SMS” again.
While an SMS is being transmitted, the indicator “Transfer SMS” will be shown on all
handsets.

SMS Service (Text Messages)

Summary of Contents for CLT321





































































































Search results

Summary of Contents for CLT321

Reviews:

Brands by name

Popular brands

ATON CLT321, User Manual

Search results

Summary of Contents for CLT321

Reviews:

Brands by name

Popular brands