70
20407785en_ba_b0
Miscellaneous
Your Aton CLT321 has an in-built digital answering machine. The total capacity is approx.
40 minutes. You can operate the answering machine from the base or from any registered
handset. With a tone-dialling enabled phone you have, furthermore, PIN-protected
remote access to the answering machine.
There are two operating modes to choose from:
- Outgoing message with message recording
- Outgoing message only.
A default standard outgoing message is already recorded for each operating mode. Thus
the answering machine is immediately ready for use. If it is set to “outgoing message with
message recording”, the device automatically switches to the “outgoing message only”
operating mode when the maximum recording capacity is reached.
You can tell by the corresponding symbol on the handset display that the answering
machine is switched on.
Answering machine is switched off
(Display is dark) Answering machine is off or no new messages.
- -
Date / time not set.
F
(F blinking) Memory full.
xx
(xx blinking) New messages on the answering machine
(xx is the number of messages).
Answering machine is switched on
- -
(blinking) Date/time not set.
0
(0 constant) No messages on the answering machine.
1…99
(Constant) Old messages on the answering machine.
1…99
(Blinking) New messages on the answering machine.
F / xx
(F and xx blinking alternately) Memory full, new messages on the
answering machine (xx = number).
Answering machine
Summary of Contents for CLT321
Page 1: ...Aton CLT321 User Guide...
Page 98: ...96 20407785en_ba_b0...
Page 99: ...97 20407785en_ba_b0...
Page 100: ...en 03 2015...
