Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual Download Page 58

Page: 58 / 202

Chapter 2: Hardware setup

2-36

2.10.3 SATA/SAS backplane

To remove the SATA/SAS backplane:
1. Remove the HDD blower case. Refer to section “2.10.2 HDD blowers”

for instructions.

2. Disconnect all cables from the

SATA/SAS backplane.

When disconnecting a cable,

hold and firmly pull the cable

plug. DO NOT pull the cable

itself. Doing so may damage

the cable!

3. From the inner edge, push the

backplane outward so that the

outer edge protrudes slightly from

the slot.

4. From the outer edge, firmly hold

the backplane and carefully slide it

out.

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server











































































































































































































Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands

Asus Pedestal/5U Rackmount Server TS500-E4 Server, User Manual

Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands