Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual Download Page 59

Page: 59 / 202

2-37

ASUS TS500-E4

To reinstall a SATA/SAS backplane:

1. Position the backplane into its

slot with the component side

facing the rear panel, and the

power connectors on top.

2. Align the backplane with the rail-

like dents on the slot to ensure

that it fits securely.

3. Slide the backplane into the slot

until it fits. If correctly installed,

the outer edge of the backplane

aligns with the corner of the drive

cage.

4. Connect the appropriate cables

to the backplane. Refer to

sections “2.9.2 SATA backplane

connections” and “2.9.3 SAS

backplane connections” for

details.

Rail-like dents

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server











































































































































































































Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands

Asus Pedestal/5U Rackmount Server TS500-E4 Server, User Manual

Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands