Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual Download Page 43

Page: 43 / 202

2-21

ASUS TS500-E4

2. Press the dummy cover into the

slot opening until the hook tab

clicks in place.

3. When installed, the dummy cover

appears as shown.

2.7.2 Installing an HDD dummy cover

The HDD dummy covers come pre-installed on the front panel bezel. In case

you removed the covers, follow these steps to re-install them.
To install an HDD dummy cover:
1. From the inside of the front panel assembly, insert the flat end of a

dummy cover into the slot as

shown. The end with the hook tab

should be close to the front panel

LEDs.

Flat end

Hook tab

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server











































































































































































































Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands

Asus Pedestal/5U Rackmount Server TS500-E4 Server, User Manual

Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands