manualshive.com logo in svg

Asus Pedestal/5U Rackmount Server TS500-E4 Server, User Manual, Page: 53 / 202

Share
Download
Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual Download Page 53

2-31

ASUS TS500-E4

2.10.1 Chassis fan

To remove the chassis fan:
1.  Unplug the chassis fan cable from 

the REAR_FAN1 connector on the 

motherboard.

2.10 Removable components

You may need to remove previously installed system components when in-

stalling or removing system devices, or when you need to replace defective 

components. This section tells how to remove the following components:
1.  Chassis fan   
2.  HDD blowers   
3.  SATA/SAS backplanes
4.  MemCool FB-DIMM fan kit
5.  Floppy disk drive module
6.  Front I/O board
7.  Chassis footpads and roller wheels
8.  Power supply unit

2.  Locate  the  four  screws  that 

secure the fan to the chassis.

3.  Remove  the  four  screws  while 

carefully supporting the chassis 

fan  with  your  free  hand  to 

prevent it from falling off. 

  Set the screws aside.

4.  Carefully remove the chassis fan.

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server











































































































































































































Reviews:

No comments