Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual Download Page 25

Page: 25 / 202

2-3

ASUS TS500-E4

2.1.2 Reinstalling the side cover

To reinstall the side cover:
1. Match and insert the upper hooks

and lower sliding edge of the cover

to the corresponding chassis holes

and edge.

2. Slide the cover toward the front

until it snaps in place.

You may need to remove some of the installed components to access

the DIMM sockets and internal connectors. Refer to section “2.10

Removable components” for instructions.

3. Drive in the two screws you

removed earlier to secure the side

cover.

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server











































































































































































































Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands

Asus Pedestal/5U Rackmount Server TS500-E4 Server, User Manual

Search results

Summary of Contents for Pedestal/5U Rackmount Server TS500-E4 Server

Reviews:

Related manuals for Pedestal/5U Rackmount Server TS500-E4 Server

Brands by name

Popular brands