Getting Started
QL-850 User Guide
27
4.
Turn the wing nut [1] on the end of the mandrel clockwise until you feel resistance. This
secures the roll in place.
5.
Put the outer flange [4] on the mandrel. Make sure the outer flange makes contact with
the roll [2].
6.
Tighten the fastener on the outer flange [4] until you feel resistance. This secures the
outer flange in place.
7.
On the front of the printer, slide the media exit guide [5] all the way to the right toward the
control panel. You can adjust this guide before printing.
8.
Open the top cover. This step deactivates the automatic media loading feature.
9.
Place the media near the entry slot.
10.
Loosen the thumbscrew on the adjustable media guide [6] and slide the guide to the width
of the media. The edges of the media should lightly contact the edges of the fixed media
guide [7] and the adjustable media guide [6]. Tighten the thumbscrew on the adjustable
media guide [6].
11.
Lift the roller handle [8] to open the input pinch rollers.
12.
Slowly guide the media into the printer as illustrated. Advance the media until it stops.
The media will be positioned under the first star wheel on the transport unit. Make sure
there is no excessive slack in the media during this process.
13.
Release the roller handle [8] to close the input pinch rollers.
14.
Close the top cover. The printer will feed media as needed and the media loading process
will be complete.
Note: If the manual media feeding process fails, the media will be ejected back out of
the printer.
[6]
[7]
[8]
Summary of Contents for QuickLabel QL-850
Page 1: ...U S E R G U I D E...
