Getting Started
QL-850 User Guide
21
Installing Ink Cartridges
Use the following instructions to install ink cartridges.
Danger: For safety, keep ink cartridges out of the reach of children. If ink is accidentally
ingested, contact a physician immediately.
1.
Open the main side door. Open both ink cartridge latches [1]. Each latch can be opened
by pressing down on the top of the locking mechanism and pulling outward.
The ink cartridge latches have labels showing where each ink color will be installed.
2.
Remove the four absorbent pads [2] from the ink cartridge slots. Save the pads for future
shipping purposes.
3.
Slide in the ink cartridge, nozzle end first, label side up. Push the cartridge in all the way.
You will feel slight resistance near the end of this process as the nozzle engages the ink
needles inside the printer. Repeat this step for each color.
Caution: There are sharp needles in the ink cartridge slot. Never put your fingers in this
area.
Note: The printer is designed so that ink cartridges cannot be inserted in the wrong slots.
Do not attempt to insert ink cartridges in the wrong slots.
4.
Make sure the ink cartridges are fully inserted. Push the ink cartridges in as far as they
will go.
5.
Close the ink cartridge latches. Then close the main side door.
[1]
[2]
Summary of Contents for QuickLabel QL-850
Page 1: ...U S E R G U I D E...
