Getting Started
QL-850 User Guide
15
Before Installing the Printer
Choosing an Installation Location
The installation environment must be as described in this section.
•
The printer power cord must be able to connect to an outlet (100V - 240V AC). This outlet
must be easily accessible.
•
Avoid installing the printer near a faucet, water heater, humidifier, or refrigerator.
•
Ensure the environment temperature is within 41 to 95 degrees Fahrenheit (5 to 35
degrees Celsius). For optimal print quality, an environment temperature of approximately
73 degrees Fahrenheit (23 degrees Celsius) is recommended.
•
Ensure the environment humidity is within 20% to 80% (non-condensing) relative
humidity. For optimal print quality, a relative humidity of approximately 60% is recom-
mended.
•
Avoid placing the printer in areas exposed to high temperature and humidity, extremely
low temperature, severe temperature changes, or direct sunlight. Especially, avoid
placing the printer near fire, outdoors, in distribution warehouses, or in refrigerated areas.
•
Avoid installing the printer in areas subject to dust.
•
The room must be properly ventilated.
•
No printer feet should float. The printer must be held level constantly.
•
When placing the printer on a desk, table, or other similar surface, it must be sturdy and
stable enough to support the weight of the printer. The table must be rated for a minimum
of 100 pounds.
•
The minimum space required for installation and maintenance is shown below.
8 inches
203 mm
15 inches
381 mm
17.75 inches
451 mm
8 inches
203 mm
Summary of Contents for QuickLabel QL-850
Page 1: ...U S E R G U I D E...
