Getting Started
QL-850 User Guide
17
2.
Press and hold the power key [3] for one second to turn the printer on.
The printer will begin the power-up process, including opening the printhead latch, and
the green LED will flash momentarily. When the green LED stops flashing and remains
on, the printer will be ready to use.
Note: The red error LED will be on until you use the After Shipping wizard later in this
guide.
Note: If the printer is on, you can press and hold the power key [3] for three seconds to
turn it off.
Installing the Printer Driver
Installing the Printer Driver (USB)
1.
Ensure the QL-850 is powered on but
not
connected to your PC via the USB cable.
Important: Do not connect the USB cable until prompted later in this procedure.
2.
Power on your PC and download the QL-850 installer program from
www.QuickLabel.com/downloads. Run the “Setup.exe” file. The Installer wizard will
open. Choose
Install Driver
.
3.
Choose
Install Printer Software
. The software installation wizard will start.
Note: If the Windows logo testing or publisher verification warning messages appear
during installation, choose to continue the installation.
4.
When prompted to select a printer connection method, choose
Configure to print using
USB
. Then choose
Next
.
Note: A USB configuration is required for the initial installation. You can later install the
printer as a network printer.
5.
When prompted, connect the QL-850 to your PC with a USB cable. The installation will
continue once the USB connection is made.
6.
When prompted, select whether the QL-850 will be set as the default printer.
7.
Choose
Finish
.
Summary of Contents for QuickLabel QL-850
Page 1: ...U S E R G U I D E...
