Safety Warnings and Precautions
QL-850 User Guide
118
Caution
•
There are high voltage points inside the printer. To avoid a fire or electrical shock, never
attempt to disassemble or repair the printer.
•
Never insert or drop any metal objects into the printer when it is open. This could cause
a fire or serious electrical shock, or damage the printer. If something falls into the printer
accidentally, switch the printer off immediately, disconnect the power plug from the power
source, and call for service. If you continue to use the printer, this could cause a fire or
serious electrical shock.
•
If the printer is dropped and damaged, switch the printer off immediately, disconnect the
power plug from the power source, and call for service. If you continue to use the printer,
this could cause a fire or serious electrical shock.
•
To avoid a fire or electrical shock, never use flammable sprays around the printer.
•
Never remove the fixed covers from the printer. This could cause a serious electrical
shock.
Important
•
While the printer is printing, do not open any covers and do not remove the power plug.
•
Do not apply excessive force or strong shock to the printer. Doing so can result in a
machine failure or impair printer quality. Be sure to open/close the covers slowly.
Moving the Printer
Warning
•
Call the dealer for advice before you ship the printer a long distance or move the printer
by car or truck where it may be subjected to shock and vibration. Moving the printer
without the proper preparation could subject it to shocks and vibrations which could
damage the printer and cause a fire.
Caution
•
Before moving the printer, use the appropriate procedures to drain ink from the printhead
or entire print system. The Before Moving and Before Shipping features are located in the
Cleaning tab of the QL-850 Maintenance Utility. Refer to the QL-850 Driver Help for
details.
•
Before you move the printer to another location in the same building, disconnect the
power cord and make sure that all other cables are disconnected.
•
The printer is heavy and moving it requires two people. One person should lift the front
by the indicated lift point, while the other person should lift the back by the indicated lift
point. Do not lift the printer by the mandrel. Lift the front of the printer by the recessed
Summary of Contents for QuickLabel QL-850
Page 1: ...U S E R G U I D E...
