Arkray AUTION ELEVEN AE-4022, Operating Manual

Page: 45 / 161

Chapter 2 Measurement Operation
AE-4022
2-10
2.3.3 Setting measurement conditions
Before starting measurement, set the measurement conditions as required. If you wish to use the same measurement
conditions as the last time, you need not set them again. See “Chapter 3. Supplementary Operations” for explanations
concerning how to set individual items.
The currently selected conditions can be printed (See “3.7.4. No.001: Printing of parameters” on page 3-21) for
checking.
Item No Setting item Description Standard
value
See
pages
No.002 Test strip type Specifies the test strip type for each measurement
mode. 10EA 3-22
No.003 Measurement result format Specifies the format of measurement results
(semiquantitative value or reflectance) for each
measurement. 0 3-24
No.004 Test strip placing direction Specifies which direction test strips should be
placed on the test strip tray. 0 3-26
No.005 Operational mode when
turning ON Specifies the operational mode used when the
instrument is turned ON. 0 3-27
No.006 Buzzer sound ON/OFF Specifies whether to sound the timing notification
buzzer. 1 3-28
No.007 Printing of abnormal marks Specifies whether to apply (when printing or
communicating with an external device) an
abnormal mark to the measurement result when an
abnormal value is detected in a sample. 1 3-29
No.008 Initialization of measurement
number when turning ON Specifies whether the system initializes the
measurement number when the instrument is
turned ON. 1 3-30
No.009 Printer use Specifies whether the built-in printer is used. 1 3-31
No.010 Number of sheets to print Specifies the number of sheets to print when
printing measurement results. 1 3-32
No.011 Number of line breaks Specifies the number of line breaks between each
measurement result. 1 3-33
No.012* Additional data Specifies whether to output data to an external
device. 1 3-34
No.013 External output ON/OFF Selects whether or not to output data to an external
source. 0 3-35
No.014 Barcode output range setting Specifies the first digit to read. 1 3-36
Specifies the number of digits to read. 13
No.016 Operator ID number
management Registers new operator ID numbers, deletes
unnecessary operator ID numbers, and prints a list
of all operator ID numbers. – 3-38
No.017 Operator ID function ON/OFF Specifies whether to use the operator ID function. 0 3-43
No.018 Operator ID number effective
time Specifies the number of seconds in which the
operator ID number is effective.
• Like screensavers for computers, if the [Standby
screen] is displayed for more than the specified
time, you need to reenter your operator ID number
before performing a test.
90 3-45