Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 23

Page: 23 / 161

Chapter 1 Before Using the AE-4022

AE-4022

1-6

1.2

Name and function of each part

1.2.1

Front side

No.

Name

Function

Display

Displays information such as operating status and error messages.

Operator panel

Used to start and stop measurement as well as to input numeric values.

Built-in printer

Thermal line printer for printing measurement results and parameter setting
details.

Maintenance cover

Prevents any light from entering the instrument. Is opened only when
installing the instrument or performing internal maintenance.

Cover open buttons (left/right) Press the left and right buttons at the same time to open the maintenance

cover.

Test strip tray

Place the test strip on this tray after dipping it in the sample to be measured.

Carrying arm

Carries the test strip placed on the test strip tray to the suction ports while the
tray rails adjust the position.

Suction ports

They absorb surplus sample urine adhering to the test strip.

Test strip feed mechanism

Transfers the test strips to the photometric section after the surplus urine is
removed. This mechanism also discards the used test strips into the waste
box.

Test strip detection window
(auto start sensor)

Detects when a test strip is placed on the test strip tray.

Incoming strip sensor
windows

The incoming test strip is detected here, and is allocated a measurement
number and a patient ID number.

The maintenance cover closed

The maintenance cover opened

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands