Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 135

Page: 135 / 161

Chapter 4 Maintenance

AE-4022

4-6

Clean the test strip tray, suction ports, test strip feed tray, and feed lever.

Wash the test strip tray, suction ports, test strip feed tray, and feed
lever with water to remove any dirt.

Wipe moisture off with a cloth to dry the cleaned parts.

10 Clean the table

Before attaching the feed lever, remove any dirt on the test strip
guides on both sides and the three test strip guides on the
photometric table, and also clean the incoming strip sensor
window, test strip aligning levers and aligning arm.

Feed lever

Test strip tray

Test strip feed tray

Suction ports

NOTE:



Do not

scratch or damage the test strip tray, suction

ports, test strip feed tray, or feed lever. Any scratches or
damage may prevent smooth feeding of the test strips.



Do not

sterilize the test strip tray with alcohol. If you use

alcohol, the test strip detection window may become
cloudy, resulting in a test strip detection error.

Test strip

guide

Test strip aligning levers

Incoming strip sensor window

Test strip

aligning

arms

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands