Arkray AUTION ELEVEN AE-4022, Operating Manual

Page: 49 / 161

Chapter 2 Measurement Operation
AE-4022
2-14
2.3.6 Entering patient ID numbers
Each patient ID number can have up to 13 digits of numeric figures and “–” characters entered. The patient ID number
entered is uniquely allocated to the measurement made just after this entry is made. After a group of measurements is
completed, the patient ID numbers are automatically deleted.
 To manually input a patient ID number
1 Call up the screen
a
With the [Standby screen] displayed, press .
• The [Patient ID number input screen] appears.
2 Enter a patient ID number
a
Enter a patient ID number.
• You can enter up to 13 digits using the numeric and keys.
REFERENCE:

In addition to the patient ID number, a measurement number is also allocated to each sample. The
measurement number is automatically incremented by one for each successive measurement from the start of
measurement until the instrument is turned OFF.
 When using a hand-held barcode reader (optional), you need not manually enter the patient ID number. Follow
the procedures in “
 To enter a patient ID number using a barcode” on page 2-15.
NOTE:
If the input value exceeds 13 digits, the first digit (the
leftmost digit) will be deleted.
REFERENCE:
 If a patient ID number has already been set, the highest-order digit (leftmost digit) flashes. If you then input a
number or “–”, the next digit to the right flashes. The flashing digit accepts key input.
 If you press during input, the currently input patient ID number is cancelled and the instrument returns to
the [Standby screen].