Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 103

Page: 103 / 161

Chapter 3 Supplementary Operations

AE-4022

3-28

3.7.9

No.006: Buzzer sound ON/OFF

Use this submenu to select whether to sound the buzzer that indicates the dipping timing for test strips during
measurement.

Call up the screen

Call up the [Item number input screen], referring to section
“3.7.1. Operation of user settings” on page 3-17, if necessary.

Press

• The [Buzzer sound ON/OFF setting screen] appears.

Select the buzzer ON/OFF setting

Select the buzzer sound ON/OFF setting, using the numeric keys.

• 0: OFF

1: ON

Press

• The buzzer ON/OFF setting is confirmed and the display returns

to the [Item number input screen].

Quit the SETUP menu

Press

twice.

• The display returns to the [Standby screen].

REFERENCE:

If you press

during operation or input, the current setting is canceled and the display returns to the [Item

number input screen].

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands