Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 121

Page: 121 / 161

Chapter 3 Supplementary Operations

AE-4022

3-46

3.7.21 No.019: Printing of operator ID numbers with results

Use this submenu to select whether to print the operator ID numbers with the measurement results.

Call up the screen

Call up the [Item number input screen], referring to section
“3.7.1. Operation of user settings” on page 3-17, if necessary.

Press

• The [Operator ID number printing ON/OFF setting screen]

appears.

Select ON or OFF for the operator ID number printing

Select whether to print the operator ID numbers, using the
numeric keys.

• 0 : OFF

1 : ON

Press

• The ON or OFF setting for the operator ID number printing is

confirmed, and the display returns to the [Item number input
screen].

Quit the SETUP menu

Press

twice.

• The display returns to the [Standby screen].

REFERENCE:

If you press

during operation or input, the current setting is canceled and the display returns to the [Item

number input screen].

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands