Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 110

Page: 110 / 161

3.7 SETUP (user settings)

AE-4022

3-35

3.7.16 No.013: External output ON/OFF

Use this submenu to specify whether to output the measurement results to an external device.

Call up the screen

Call up the [Item number input screen], referring to section
“3.7.1. Operation of user settings” on page 3-17, if necessary.

Press

• The [External output ON/OFF setting screen] appears.

Select external output ON/OFF

Select ON or OFF for the external output, using the numeric keys.

• 0: OFF

1: ON

Press

• The external output ON/OFF setting is confirmed and the display

returns to the [Item number input screen].

Quit the SETUP menu

Press

twice.

• The display returns to the [Standby screen].

REFERENCE:

If you press

during operation or input, the current setting is canceled and the display returns to the [Item

number input screen].

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands