Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 107

Page: 107 / 161

Chapter 3 Supplementary Operations

AE-4022

3-32

3.7.13 No.010: Number of sheets to print

Use this submenu to set the number of sheets used to print the measurement results.

Call up the screen

Call up the [Item number input screen], referring to section
“3.7.1. Operation of user settings” on page 3-17, if necessary.

Press

• The [Number of sheets to print setting screen] appears.

Input the number of sheets to print

Input the number of sheets to print, using the numeric keys.
The acceptable number of sheets is from

(1 to 3

sheets).

Press

• The number of sheets to print is confirmed and the display returns

to the [Item number input screen].

Quit the SETUP menu

Press

twice.

• The display returns to the [Standby screen].

REFERENCE:

If you press

during operation or input, the current setting is canceled and the display returns to the [Item

number input screen].

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands