Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 124

Page: 124 / 161

3.7 SETUP (user settings)

AE-4022

3-49

Set the day of the week

Select the day of the week for the second QC deadline, using the
numeric keys. If you use one QC deadline, select “9: No setting”.

• 0: Everyday

1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
7: Sunday
9: No setting

Press

• The selected day is stored and the [Time setting screen] for the second deadline appears.

If you selected “9: No setting”, skip step

and go to step

Set the time

Set the time (00 to 23 o’clock) for the second QC deadline, using
the numeric keys.

Press

• The set time is stored and the display returns to the [Item number

input screen].

Quit the SETUP menu

Press

twice.

• The display returns to the [Standby screen].

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands