Arkray AUTION ELEVEN AE-4022 Operating Manual Download Page 102

Page: 102 / 161

3.7 SETUP (user settings)

AE-4022

3-27

3.7.8

No.005: Operational mode when turning ON

Use this submenu to set the operational mode when the instrument is turned ON.
See the explanation of the operational modes in the “



Operational mode” on page 2-3.

Call up the screen

Call up the [Item number input screen], referring to section
“3.7.1. Operation of user settings” on page 3-17, if necessary.

Press

• The [Operational mode setting screen] appears.

Specify the operational mode

Select the operational mode to be used when the instrument is
turned ON, using the numeric keys.

• 0: Auto start

1: Cycle start

Press

• The operational mode is confirmed and the display returns to the

[Item number input screen].

Quit the SETUP menu

Press

twice.

• Then the display returns to the [Standby screen].

REFERENCE:

If you press

during operation or input, the current setting is canceled and the display returns to the [Item

number input screen].

Summary of Contents for AUTION ELEVEN AE-4022


































































































































































Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands

Arkray AUTION ELEVEN AE-4022, Operating Manual

Search results

Summary of Contents for AUTION ELEVEN AE-4022

Reviews:

Related manuals for AUTION ELEVEN AE-4022

Brands by name

Popular brands