Arjohuntleigh Triadyne Proventa User Manual Download

Page: 39 / 88

5-3

Instaflate

Feature

Use the Instaflate feature to assist in patient transfer and bathing by increasing air pressures in all cushions,
creating a firm surface.

With

Home

menu showing, press

Instaflate

button.

• The display shown at right will appear and

Instaflate Activated

will flash.

• Rotation, pulsation and percussion will be

deactivated. Warmer will not be deactivated.

• Five beeps will sound when the

Instaflate

feature is activated, and will sound again
every 20 minutes, until it is cancelled.

Press button for

Cancel

. The display shown at right

will appear temporarily and then return to the

Home

menu.

If rotation was on before the Instaflate feature was activated, five beeps will sound and the

Turn

On Rotation?

display will appear to prompt the caregiver to reactivate rotation. If pulsation was

on before the Instaflate feature was activated, it will be restored. If percussion was on before the
Instaflate feature was activated, it

will not

be restored.

Seat Deflate

Use seat deflate to assist patient exit and bedpan placement by reducing the air pressures in the cushions of
the seat section by 50%.

With

Home

menu showing, press button for

Seat Deflate

• The display shown at right will appear and

Seat

Deflate Activated

will flash.

• Rotation, pulsation and percussion will be

deactivated.

• Five beeps will sound when seat deflate is

activated and will sound again every 20 minutes
until it is cancelled.

Press button for

Cancel

. The display shown at right

will appear temporarily and then return to the

Home

menu.

If rotation was on before seat deflate was
activated, five beeps will sound and the

Turn

On Rotation?

display will appear to prompt

the caregiver to reactivate rotation. If pulsation was on before seat deflate was activated, it will be
restored. If percussion was on before seat deflate was activated, it

will not

be restored.

INSTAFLATE

ACTIVATED

Press to Cancel Instaflate-----Cancel>

Instaflate Cancelled!

SEAT DEFLATE

ACTIVATED

Press to Cancel Seat Deflate-----Cancel>

Seat Deflate Cancelled!

Summary of Contents for Triadyne Proventa

























































































Search results

Summary of Contents for Triadyne Proventa

Reviews:

Related manuals for Triadyne Proventa

Brands by name

Popular brands

Arjohuntleigh Triadyne Proventa, User Manual

Search results

Summary of Contents for Triadyne Proventa

Reviews:

Related manuals for Triadyne Proventa

Brands by name

Popular brands