LCD CONFIGURATION MENU
65
Migrating occurs when a disk is added to a raid set. Migration
status is displayed in the raid status area of the Raid Set infor-
mation when a disk is added to a raid set. Migrating status is
also displayed in the associated volume status area of the vol-
ume set Information when a disk is added to a raid set
4.8.2.4 Activate Incomplete RaidSet
When one of the disk drive is removed in power off state, the
raid set state will change to Incomplete State. If user wants to
continue to work, when the RAID subsystem is power on. User
can use the Activate Incomplete RaidSet option to active the
raid set. After user complete the function, the Raid State will
change to Degraded Mode.
4.8.2.5 Create Hot Spare Disk
Please refer to this chapter section 4.5: Designating Drives as
Hot Spares.
4.8.2.6 Delete Hot Spare Disk
To delete hot spare, press
UP/DOWN
to choose the Delete Hot
Spare Disk option. Using
UP/DOWN
to select the hot spare
number that user want to delete and then press
Enter
to select
it. The confirmation screens appear and press
Enter
to delete
the hot spare.
4.8.2.7 Display Raid Set Information
Using
UP/DOWN
to choose the Display Raid Set Information
option and press
Enter
. Using
UP/DOWN
to select the raid set
number that user want to display. The raid set information will
be displayed.
Using
UP/DOWN
to scroll the raid set information, it shows
Raid Set Name, Total Capacity, Free Capacity, Number of Mem-
ber Disks, Min. Member Disk Capacity and Raid Set State.
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
