LCD CONFIGURATION MENU
66
4.8.3 Volume Set Function
A volume set is seen by the host system as a single logical de-
vice. It is organized in a RAID level with one or more physical
disks. RAID level refers to the level of data performance and
protection of a Volume Set. A Volume Set capacity can consume
all or a portion of the disk capacity available in a Raid Set. Mul-
tiple Volume Sets can exist on a group of disks in a Raid Set.
Additional Volume Sets created in a specified Raid Set will reside
on all the physical disks in the Raid Set. Thus each Volume Set on
the Raid Set will have its data spread evenly across all the disks
in the Raid Set.
To enter a Volume Set Functions, press
Enter
to enter the main
menu. Press
UP/DOWN
to select the Volume Set Functions op-
tion and then press
Enter
to enter further submenus. All volume
set submenus will be displayed.
4.8.3.1 Create Raid Volume Set
To create a volume set, Please reference this chapter section
4.7: Using Raid Set and Volume Set Functions. The volume set
attributes screen shows the volume set default configuration
value that is currently being configured.
For ARC-5030
1. The attributes for ARC-5030 are Raid Level, Stripe Size,
Cache Mode, IDE Host Channel, IDE Drive Select, Tagged
Queuing, IDE Xfer Mode, and Volume Name (number). See
Figure 4.7.3.1-1
For ARC-6020
1. The attributes for ARC-6020 are Raid Level, Stripe
Size, Cache Mode, SCSI HOST, SCSI ID, SCSI LUN, Tagged
Queuing, SCSI Max Rate, and Volume Name (number). See
Figure 4.8.3.1-2
All value can be changed by user. Press the UP/DOWN to select
attribute. Press the
Enter
to modify the default value. Using
the
UP/DOWN
to select attribute value and press the
Enter
to
accept the default value. The following is the attributes descrip-
tions. Please reference this chapter section 4.6 Using Raid Set
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
