VT-100 UTILITY CONFIGURATION
92
A single volume set is created and consumed all or a portion of
the disk capacity available in this raid set. Define the capacity of
volume set in the Available Capacity popup. The default value for
the volume set is displayed in the selected capacity. To enter a
value less than the available capacity, type the value and press
the
Enter
key to accept this value. If it only use part of the raid
set capacity, you can use the
Create Volume Set
option to de-
fine another volume sets.
Stripe size
This parameter sets the size of the stripe written
to each disk in a RAID 0, 1, 5 or 6 logical drive. You can set the
stripe size to 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, or 128 KB.
A larger stripe size produces better-read performance, especially
Arrow Key: Move cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Quick Volume/Raid Setup
Total 4 Drives
Raid 0
Raid 10
Raid 10 + Spare
Raid 3
Raid 5
Raid 6
Raid 3 + Spare
Raid 5 + Spare
Raid 6 + Spare
Raid 5
Available Capacity : 160.1GB
Selected Capacity : 160.1GB
Arrow Key: Move cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Quick Volume/Raid Setup
Total 4 Drives
Raid 0
Raid 10
Raid 10 + Spare
Raid 3
Raid 5
Raid 6
Raid 3 + Spare
Raid 5 + Spare
Raid 6 + Spare
Raid 5
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
