VT-100 UTILITY CONFIGURATION
132
Note:
1. The Bootable CD VT100 utility connected through the con
troller’s serial port cannot support the update firmware fea
-
ture.
2. User can only update the firmware through the VT100
Terminal or web browser-based RAID Management via HTTP
Proxy through the controller’s serial port or LAN port.
5.5.5.13 Restart Controller
Use the Restart Controller Function to restart the RAID subsys-
tem controller. To restart the controller, move the cursor bar
to the Main menu Raid System Function itme and then press
the
Enter
key. The Raid system Function menu appears on the
screen. Press
Enter
key to select Restart Controller item. The
Restart Controller confirmation screen appers. Select Yes
key
to
restart entire Raid System.
Arrow Key: Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Raid Rebuild Priority
Maximum ATA Mode
Capacity Truncation
Terminal Port Config
Update Firmware
Restart Controller
Restart Controller
Restart Controller?
1200
No
Yes
Note:
It can only work properly at Host and Drive without any activ-
ity.
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
