WEB BROWSER-BASED CONFIGURATION
138
6. Web Browser-based Configuration
The RAID subsystem web browser-based configuration utility is firm
-
ware-based and uses to configure raid sets and volume sets. Use this
utility to:
• Create raid set,
• Expand raid set,
• Define volume set,
• Add physical drive,
• Modify volume set,
• Modify RAID level/stripe size,
• Define pass-through disk drives,
• Modify system function,
• Update firmware and,
• Designate drives as hot spares.
If you need to boot the operating system from a RAID system, you
must first create a RAID volume by using front panel touch-control
keypad, Bootable CD VT-100 utility at X86-based system, Web Browser
through Ethernet LAN, or VT-100 terminal.
6.1 Firmware-embedded TCP/IP & web
browser-based RAID manager (using the
controller’s 10/100 Ethernet LAN port)
To ensure proper communications between the RAID subsystem
and Web browser-based RAID management, Please connect the
RAID system Ethernet LAN port to any LAN switch port.
The controller has embedded the TCP/IP & Web Browser-based
RAID manager in the firmware. User can remote manage the RAID
system without adding any user specific software (platform in
-
dependent) via standard web browsers directly connected to the
10/100 Ethernet RJ45 LAN port.
To configure Internal RAID subsystem on a local or remote ma
-
chine, you need to know its IP Address. The IP address will default
show in the LCD screen. Launch your firmware-embedded TCP/IP &
Web Browser-based RAID manager by entering http://[IP Address]
in the web browser.
Note that you must be logged in as administrator with local admin
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
