Areca ARC-5030 Series User Manual Download Page 53

Page: 53 / 187

CONFIGURATION METHOD

3.5

Configuration Menu Tree

The following is an expansion of the menus in configuration Util

ity that can be accessed through the LCD panel, RS-232 serial port

and Ethernet LAN port.

3.4.2 Firmware-embedded TCP/IP & web brows-

er-based RAID manager (using the controller’s

10/100 Ethernet LAN port)

To ensure proper communications between the RAID subsystem

and Web browser-based RAID management, Please connect the

RAID system Ethernet LAN port to any LAN switch port.

The controller has embedded the TCP/IP & Web Browser-based

RAID manager in the firmware. User can remote manage the

RAID system without adding any user specific software (platform

independent) via standard web browsers directly connected to the

10/100 Ethernet RJ45 LAN port.

To configure Internal RAID subsystem on a local or remote

machine, you need to know its IP Address. The IP address will

default show in the LCD screen. Launch your firmware-embedded

TCP/IP & Web Browser-based RAID manager by entering http://

[IP Address] in the web browser.

Note:

You must be logged in as administrator with local admin

rights on the remote machine to remotely configure it.

The RAID subsystem controller default User Name is “admin”

and the Password is “0000”.

Note:

You must be logged in as administrator with local admin

rights on the remote machine to remotely configure it.

The RAID subsystem controller default User Name is “admin”

and the Password is “0000”.

Summary of Contents for ARC-5030 Series




























































































































































































Search results

Summary of Contents for ARC-5030 Series

Reviews:

Related manuals for ARC-5030 Series

Brands by name

Popular brands

Areca ARC-5030 Series, User Manual

Search results

Summary of Contents for ARC-5030 Series

Reviews:

Related manuals for ARC-5030 Series

Brands by name

Popular brands