LCD CONFIGURATION MENU
56
server chassis or storage case. The following figures illustrate the
jumper and connector location in the RAID controller.
4.2
Starting LCD Configuration Utility
The main menu appears on the LCD screen, as shown below:
Use the up and down arrow buttons to move left and right and
highlight a menu item. Press
Enter
to select the highlighted item.
Press the
UP/DOWN
to browse the selection. Press
ESC
to return
to the previous screen.
4.3
LCD Configuration Utility Main Menu
Options
Select an option and the related information or submenu items dis-
play beneath it. The submenus for each item are explained on the
section 4.8.3. The configuration utility main menu options are:
Figure 1-1 LCD connector connected between SATA RAID Controller
to rear of LCD panel
LCD
Normal Status
Problem indication
Power LCD
Bright Green
This LED does not light up after
power switched on
Host Access LED
B l i n k g r e e n d u r i n g h o s t
computer accessing the RAID
subsystem
LED never flickers
Disk Activity LED This LED blinks during hard
drive read and write activity
LED not light up
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
