manualshive.com logo in svg

Areca ARC-5030 Series, User Manual

Share
Download
Areca ARC-5030 Series User Manual Download Page 75

LCD CONFIGURATION MENU

75

4.8.4.1 Display Drive Information 

Using 

UP/DOWN

 to choose the View Drive Information op-

tion and press 

Enter

. Using 

UP/DOWN

 to select the drive IDE 

number that user want to display. The drive information will be 

displayed. The drive information screen shows the Model Name, 

Serial Number, Firmware Rev., Device Capacity, Device PIO 

Mode, Current UDMA, Supported UDMA, and Device State. 

4.8.4.2 Create Pass-Through 

Disk is no controlled by the RAID subsystem firmware and thus 

cannot be a part of a raid set. The disk is available to the op-

erating system as an individual disk. It is typically used on a 

system where the operating system is on a disk not controlled 

by the RAID subsystem firmware.

Using 

UP/DOWN

 to choose the Create Pass-Through Disk op-

tion and press 

Enter

. Using 

UP/DOWN

 to select the drive IDE 

number that user want to create. The drive attributes will be 

displayed.

Summary of Contents for ARC-5030 Series




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands