VT-100 UTILITY CONFIGURATION
107
5.5.3.1.1.10 Max Sync Rate
Arrow Key: Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Volume Set Function
Volume Set Function
Delete Volume Set
Modify Volume Set
Check Volume Set
StopVolume Check
Display Volume Info.
Create Volume Set
Volume Creation
Volume Name : Volume Set # 00
Capacity : 160.1GB
Raid Level : 5
Stripe Size : 64K
SCSI Channel : 0
SCSI ID : 0
SCSI LUN : 0
Cache Mode : Write Back
Tag Queuing : Enabled
Max Sync Rate : 160 MB/sec
Max Sync Rate : 320MB/sec
Max Sync Xfer Rate
Async
20 MB/Sec
40 MB/Sec
80 MB/Sec
320MB/Sec
160 MB/Sec
5.5.3.1.2 For ARC-5030
The following steps is the volume set features for ARC-5030:
1. Volume sets of different RAID levels may coexist on the
same raid set.
2. Up to 3 volume sets in a raid set can be created by the
RAID subsystem controller. (PATA support Master/Slave vol-
ume set, SATA supports Master volume set)
3. The maximum addressable size of the single volume set is
2 TB(32-bit Mode).
4. Support greather than 2TB capacity per volume set (64-bit
LBA mode).
To Create a volume set, following the below steps:
1. Select the Volume Set Function from the Main menu.
2. Choose the Create Volume Set from Volume Set Functions
dialog box screen.
3. The Create Volume From Raid Set dialog box appears. This
screen displays the existing arranged raid sets. Select the
raid set number and press
Enter
key. The Volume Creation is
displayed in the screen.
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
