manualshive.com logo in svg

Areca ARC-5030 Series, User Manual

Share
Download
Areca ARC-5030 Series User Manual Download Page 151

151

WEB BROWSER-BASED CONFIGURATION

• Tag Queuing

The Enabled option is useful for enhancing overall system per-

formance under multi-tasking operating systems. The Command 

Tag (Drive Channel) function controls the SCSI command tag 

queuing support for each drive channel. This function should 

normally remain enabled. Disable this function only when using 

older SCSI drives that do not support command tag queuing.

• Max SCSI Speed

The RAID subsystem supports 320.00 MB/sec ......as the highest 

data transfer rate.

• SCSI Channel/SCSI/ID

SCSI Channel:

 The RAID subsystem only supports one SCSI 

Channel.

SCSI ID:

 Each SCSI device attached to the SCSI card, as well 

as the card itself, must be assigned a unique SCSI ID number. A 

Wide SCSI channel can connect up to 15 devices. The RAID sub-

system is as a large SCSI device. We should assign an ID from a 

list of SCSI IDs. 

SCSI LUN:

 Each SCSI ID can support up to 8 LUNs.  Most SCSI 

host adapter treats each LUN like a SCSI disk.

6.9.1.2 For ARC-5030

The following is the volume set features for the ARC-5030

1. Volume sets of different RAID levels may coexist on the 

same raid set.

2. Up to 16 volume sets in a  raid set can be created by the 

SATA RAID  controller.

3. The maximum addressable size of a single volume set is 2 

TB.

4. Support greather than 2TB capacity per volume set (64-bit 

LBA mode).

To create volume set from raid set system, move the cursor bar 

to the main menu and click on the Create Volume Set link. The 

Select The Raid Set To Create On It screen will show all raid set 

number. Tick on a raid set number that you want to create and 

then click on the Submit button.

Summary of Contents for ARC-5030 Series




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands