HARDWARE INSTALLATION
38
2.4 Hot-plug Drive Replacement
The RAID subsystem supports the ability of performing a hot-swap
drive replacement without powering down the system. A disk can
be disconnected, removed, or replaced with a different disk without
taking the system off-line. The RAID rebuilding will be processed
automatically in the background. When a disk is hot swap, the
RAID subsystem may no longer be fault tolerant. Fault tolerance
will be lost until the hot swap drive is subsequently replaced and
the rebuild operation is completed.
• Step 10 Turn on the host computer Power
Safety checks the installation and reinstall the computer cover.
Connect all power code. Turn on the AC power switch at the rear
of computer then press the power button at the front of the host
computer.
• Step 11 Configure RAID Subsystems
You can configure RAID subsystem either through the LCD Con
-
figuration utility or RS232C/LAN port out of band management
utility. The RAID subsystem supports VT-100 terminal or CD-ROM
bootable VT-100 utility and HTTP Proxy web-browser management
through the RS-232C port. Please reference the Chapter 4, Chap-
ter 5 and Chapter 6 for the configuration.
Figure 2-4, JP2 connect to the lan Port daughterboard JP1.
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
