manualshive.com logo in svg

Areca ARC-5030 Series, User Manual

Share
Download
Areca ARC-5030 Series User Manual Download Page 179

179

APPENDIX

9. The Firmware upgrade will take approximately thirty seconds to 

complete.

10. After the Firmware upgrade is complete, a bar indicator will 

show “Firmware Has Been Updated Successfully”.

Upgrade Firmware Through HTTP Proxy 

Web Browser Manager

Get the new version firmware for your RAID subsystem controller. 

For Example, download the bin file from your OEM’s web site onto 

the c:

1. To upgrade the RAID subsystem firmware, move the mouse cur

-

sor to Upgrade Firmware link. The Upgrade The Raid System Firm-

ware screen appears.

2. Click Browse. Look in the location where the Firmware upgrade 

Note: 

The user doesn’t need to reconfigure all of the settings after the 

firmware upgrade is complete, because all of the settings will 

keep us the vaules before upgrade.

Summary of Contents for ARC-5030 Series




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands