WEB BROWSER-BASED CONFIGURATION
150
then click on the Submit button.
The new create volume set allows user to select the Volume
name, capacity, RAID level, strip size, SCSI ID/LUN, Cache
mode, tag queuing and Max Sync Rate.
• Volume Name
The default volume name will always appear as Volume Set.
#. You can rename the volume set name providing it does not
exceed the 15 characters limit.
• Capacity
The maximum volume size is default in the first setting. Enter
the appropriate volume size to fit your application. The capacity
can also increase or decrease by the .UP and DOWN arrow key.
• Raid Level
Set the RAID level for the Volume Set. Highlight Raid Level and
press <Enter>.
The available RAID levels for the current Volume Set are dis-
played. Select a RAID level and press <Enter> to confirm.
• Strip Size
This parameter sets the size of the stripe written to each disk in
a RAID 0, 1, 5 or 6 logical drive. You can set the stripe size to 4
KB, 8 KB, 16 KB, 32 KB, 64 KB, or 128 KB.
A larger stripe size produces better-read performance, especially
if your computer does mostly sequential reads. However, if you
are sure that your computer does random reads more often,
select a small stripe size.
• Cache Mode
The RAID subsystem supports Write-Through Cache and Write-
Back Cache.
Summary of Contents for ARC-5030 Series
Page 11: ......
Page 74: ...LCD CONFIGURATION MENU 74 Figure 4 8 4 2 ARC 6020...
