Figure. 4.5 - 21. Application control section.
You can connect object statuses directly to specific physical outputs in the "Signal connections"
subsection (
Control
→
Application control). A status can be connected to output relays, as well as to
user-configurable LEDs. A connection to an output can be either latched ("|x|") or non-latched ("x").
Object blocking is done in the "Blocking input control" subsection. It can be done by any of the
following: digital inputs, logical inputs or outputs, object status information as well as stage starts, trips
or blocks.
Figure. 4.5 - 22. Registers section.
A
AQ
Q-T215
-T215
Instruction manual
Version: 2.04
28