Anritsu Spectrum Master MS2720T, User Manual

Page: 875 / 1035

3-15 Markers Menu EVDO Signal Analyzer
3-32 PN: 10580-00235 Rev. D 3GPP2 MG
3-15 Markers Menu
Key Sequence:
Markers
3-16 Sweep Menu
Key Sequence:
Shift > Sweep
(3) key
Markers are available only in CDP MAC and Spectrum measurements.
Marker: Press this submenu key to select marker 1 to marker 6. The
selected marker is underlined on the key. Each press of the key moves the
selection to the next marker number. Use the On Off submenu key to turn
the marker On or Off.
On, Off: Press this submenu key to turn On or Off the marker that is
currently selected (shown underlined) on the Marker, 1 2 3 4 5 6 key.
Marker Table: This functions turns On and Off a marker table in the CDP
MAC view only. The marker table indicates the values of all active markers.
All Markers Off: Pressing this soft key turns OFF all markers.
Figure 3-29. EVDO Measurements Menu
Sweep Single/Continuous: This submenu key toggles between
continuous sweep and single sweep. In single sweep mode, the results of a
sweep are displayed on the screen while the instrument awaits a trigger
event to start a new sweep.
Trigger Sweep: Pressing this submenu key causes the instrument to make
a single sweep when the instrument is in single sweep mode. This key has
no function when the instrument is in continuous sweep mode.
Figure 3-30. EVDO Sweep Menu
Marker
Marker
1 2 3 4 5 6
On
Off
Marker Table
On Off
All
Markers
Off
Sweep
Trigger
Sweep
Sweep
Continuous Single
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com