Anritsu Spectrum Master MS2720T, User Manual

Page: 993 / 1035

3-7 Generator Menu Chapter 3 — T-Series Tracking Generator
3-10 PN: 10580-00339 Rev. C Tracking Generator MG
Settings Menu
Key Sequence:
Measure (Shift + 4) > Generator > Settings
Ext Gain/Loss: Sets the tracking generator (RF OUT) external
attenuation or gain. Press the Ext Gain/Loss submenu key and select a
value from 0 dB to 100 dB, then select either dB External Loss or dB
External Gain. The Generator Gain/Loss setting adjusts the Generator
output power level displayed in the upper-right corner.
Regardless of the external gain or loss setting, the output power range of
the tracking generator will not change.
Power Statistics: Press to display the Tracking Generator Summary
table displaying the spectrum analyzer received Maximum, Average, and
Minimum power of each frequency range sweep. Only available with
Generator Mode set to tracking.
Back: Press to return to the “Generator Menu” on page 3-9 .
Figure 3-10. Settings Menu
Settings
Ext Gain/Loss
0.0 dB Ext Gain
Power Statistics
Off On
Back
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com