Anritsu Spectrum Master MS2720T, User Manual

Page: 540 / 1035

AM/FM/PM Analyzer (Option 509) 7-21 Marker Menu
Spectrum Analyzer MG PN: 10580-00349 Rev. H 7-31
7-21 Marker Menu
Key Sequence:
Marker
Marker
1 2 3 4 5 6:
Press to turn On a specific marker. The active (selected)
marker is underlined on the submenu key.
On Off: Press to turn On and Off the selected marker. The current setting is
underlined on the submenu key.
Delta
On Off:
Press to turn On and Off a delta marker. You are prompted for a
delta offset frequency, either positive or negative from the frequency of the
current active marker. The current setting is underlined on the submenu key.
Peak Search: Press to place the currently active marker on the highest
signal amplitude that is currently displayed in the sweep window.
Marker Freq to Center: Press to move the frequency that is noted by the
active marker to the center frequency position and the center of the sweep
window.
Marker to Ref Lvl: Press to set the amplitude of the currently active marker
as the reference level, which is the top horizontal line in the sweep window.
Marker Table
On Large Off:
Press to turn On or Off the marker table, which is displayed
below the sweep window (Large is not functional in AM/FM/PM mode). The
table is automatically sized to display all markers that are turned on. In
addition to the marker frequency and amplitude, the table also shows delta
frequencies and delta amplitudes for all markers that have deltas entered for
them. The current setting is underlined on the submenu key.
All Markers Off: Press to turn Off all markers.
Figure 7-28. Marker Menu
Peak Search
Delta
On Off
On
Off
All Markers
Off
Marker
1 2 3 4 5 6
Marker Freq
to
Center
Marker
to
Ref Lvl
Marker Table
On Large Off
Marker
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com