Anritsu Spectrum Master MS2720T, User Manual

Page: 822 / 1035

CDMA Signal Analyzer 2-5 CDMA Demodulator Measurements Setup
3GPP2 MG PN: 10580-00235 Rev. D 2-9
CDP Table View Setup
The CDP table view displays all of the active codes in a tabular format.
From the Demodulator measurement menu, use the following procedure for CDP Table view:
1. Press the
CDP
submenu key to display the Code Domain Power menus.
2. Press the
Zoom
submenu key to activate zoom for
16
,
32
, or
64
codes.
3. Press the
Zoom Start Index
submenu key and enter the desired location manually.
4. Press
CDP Units
to select either
Relative
power (in dB) or
Absolute
power (in dBm).
5. Press
Back
to go back to the previous menu.
6. Press the
CDP Table
submenu key to display the measurements ( Figure 2-7 ).
Figure 2-7. Demodulator, CDP Table
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com