Anritsu Spectrum Master MS2720T, User Manual

Page: 987 / 1035

3-4 Transmission Measurements Chapter 3 — T-Series Tracking Generator
3-4 PN: 10580-00339 Rev. C Tracking Generator MG
3-4 Transmission Measurements
Each Tracking Generator option includes normalized transmission measurements.
1. Set the frequency and amplitude parameter required for the DUT.
2. Press the
Shift
key, then the
Measure
(
4
) key. Press the
Generator
key. Set the
Generator Mode
to
Tracking
and turn
Generator Output On
.
3. Connect a through cable between the
RF OUT
and
RF In
connectors. From the
Generator
submenu, press the
Transmission Measurement
submenu key ( Figure 3-3 ).
4. Toggle
Normalize On
( Figure 3-4 )
.
A message will flash when the process is complete.
Figure 3-3. Normalize Off (Trace at ~0 dBm)
Figure 3-4. Normalize On (Trace at 0 dB)
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com